Search

3.2 V6 Turbo PEC Steel Connecting Rods

Manufacturer: PEC
SKU: 3.2 V6 Turbo PEC Steel Connecting Rods
Manufacturer part number: 3.2 V6 Turbo PEC Steel Connecting Rods
£599.95
£765.92
PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.
*
*
+ -

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range. 

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Part Number

H-Beam - G0049

I-Beam - G0201

H-Beam RD - G0196

I-Beam  RD - G0326

Engine Type All 1.8 20v Turbo Engines
Length C/C 144.00mm
Small End Diameter 20.00mm
Small End Width 25.00mm
Big End Diameter 50.60mm
Big End Width 25.00mm

 

*Rifle drilling available - please select above

Products specifications
Component Type Engine Block
Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*
Description

PEC's own in house design facilities are able to create many different components but for nearly 10 years now, it's our connecting rods that have helped set us apart from the competition in terms of availability, ease of fitment and size of range. 

Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems.

H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required.

PEC Connecting rods have been designed, manufactured and tested to the highest levels of scrutiny before being released to the trade and the public alike and their success record speaks for itself.

Part Number

H-Beam - G0049

I-Beam - G0201

H-Beam RD - G0196

I-Beam  RD - G0326

Engine Type All 1.8 20v Turbo Engines
Length C/C 144.00mm
Small End Diameter 20.00mm
Small End Width 25.00mm
Big End Diameter 50.60mm
Big End Width 25.00mm

 

*Rifle drilling available - please select above

Products specifications
Component Type Engine Block